Here is a breakdown of the terminal output of panel messages from FCI E3 and S3 Panels. Local: Pull Station FIRST ALARM AMM_Pull_Stat L1M001 00:14:52 01/01/11 0x0d 0x0a 0x4c 0x6f 0x63 0x61 0x6c 0x3a 0x20 0x50 0x75 0x6c 0x6c 0x20 0x53 0x74 0x61 0x74 0x69 0x6f 0x6e 0x0d...
Here are the terminal commands for the older Notifier panels (AFP-200, AFP-400). If I remember right I even got these to work on the NFS-3030 and NFS-640. They will not work on the newer NFS2 panels. AFP-200 / AFP-400 Serial Terminal Commands:...
Here are all the commands for communicating / controlling the FCI E3 and S3 fire alarm control panels. Note: When sending the commands make sure you’re using plain text and set your terminal app to ONLY APPEND A SINGLE CR CHARACTER. The carriage return part is...
Over the years I managed to learn a little bit about programming the FCI E3 and S3 panels. Using Camworks has always been a bittersweet experience and sometimes made me want to throw my laptop into the trashcan along with the fire panel I was working on….So far...
